iso 9001:2008
English  |  Fran├žais


Flex Systems
Flex Systems

The Enrange Flex EX Series of pre-packaged, off the shelf radio control systems provides a standard cost effective solution to the restrictive use of hard-wired cabling.

They are used for controlling remotely operated overhead bridge crane controls, mobile hydraulic equipment, and other industrial machinery safely and effectively.

The basic system comes complete with the followi

Falk "Steelflex" Grid Coupling

A general purpose, lubricated design that combines the economy and high torque capacity of a gear coupling with the torsional flexibility of an elastomer coupling.

Torsional flexibility is the ability of these couplings to torsionally deflect when subjected to normal shock or vibratory loads, providing flexible accommodation to changing load conditions.

It absorbs impact energy .

It dampens vibration and reduces peak or shock loads by as much as 30%.

Its "Replace-In-Place" design makes installation quick and easy. When lubricated with Falk Long Term Grease at installation these couplings require no periodic maintenance and are backed by a five-year lubrication warranty.

Falk Rexnord "Steelflex Grid" Coupling types include: Type 'T10' Close-Coupled Coupling Ideal for use in four-bearing systems. Features a horizontally-split cover which allows for grid replacement without the movement of the connected equipment.

Torques from 460 to 8,250,000 Bores from 1.125 to 20.000 inches

Falk Rexnord Type 'T20' Close-Coupled Coupling A double-flexing design featuring a vertically-split steel cover. Ideal for higher running speeds.

Torques from 460 to 660,000 Bores from 1.125 to 10.000 inches

Falk Rexnord Type 'T31' Full-Spacer Coupling Complete center section drops out for easy service of connected equipment bearings and seals. Ideal for pump applications. Torques from 460 to 253,000 Bores from 1.375 to 8.000 inches

Falk Rexnord Type 'T35' Half- Spacer Coupling An economic spacer design for easy service of connected equipment bearings and seals. Ideal for pump applications. Torques from 460 to 253,000 Bores for Shaft Hub from 1.375 - 8.000 inches and T Hub from 1.125 - 7.250 inches.

Falk Rexnord Type 'T50' Floating-Shaft Coupling Double-piloted design for connecting equipment where the distance between shafts is too large for a spacer type coupling. Torques from 1.320 to 1,650,000 Bores from 1.375 to 13.000 inches

Copyright  2008 Rotator Products Limited   |   Design & Hosting By ICM Consulting Corp.