ROTATOR PRODUCTS LIMITED

iso 9001:2008
FM63879
English  |  Fran├žais


PRODUCT PROFILE

Heavy Bar 1
Heavy Bar 1

Hevi-Bar I is designed for heavy-duty, high speed applications such as material handling cranes and ship loading equipment.
 

  • 700, 1000, & 1500 Amp
  • UL Listed
  • All components are fully insulated for both indoor and outdoor use
  • Long

  • Falk "Lifelign" Gear Coupling

    pdf

     

     Falk "Lifelign" gear couplings are designed to AGMA standard sizes making them interchangeable "half for half" with other standard gear couplings regardless of differences in sleeve barrel, hub and bore dimensions. The large bore capacity and high ratings, combined with a gear coupling's inherent "torque density" makes this gear coupling the most economical choice offering a 35% money-saving over other competitive brands.

    Falk Rexnord"Lifelign" Gear CouplingsTypes available include:

    'G'-Series Standard Flanged-Sleeve: A general-purpose gear coupling ideal for bulk systems, paper machines, fans, pumps, cranes, mixers, sugar mills, crushers and other high-torque applications.

    Falk Rexnord Type 'G10' and 'G20' Standard Flanged-Sleeve gear coupling - Double-Engagement gear coupling, Close-Coupled  gear coupling

    • Torques from 10,080 to 1,197,000 lb.in.
    • Bores from 1.875 to 10.875 inches

    Falk Rexnord Type 'G32' Standard Flanged-Sleeve - Spacer

    • Torques from 10,080 to 1,197,000 lb.in.
    • Bores from 1.875 to 10.875 inches

    Falk Rexnord Type 'G52' Standard Flanged-Sleeve - Floating Shaft

    • Torques from 4,370 to 1,197,000 lb.in.
    • Bores: SB Shaft End from 1.500 - 9.500 and SD Shaft Diameter from 1.562 to 9.560 inches

    Falk Rexnord Type 'GC' Continuous-Sleeve: The one-piece sleeve design is used on high-speed equipment with low-inertia requirements and in applications requiring a low initial cost.

    • Double-Engagement, Close-Coupled
      • Torques from 10,080 to 163,800 lb.in.
      • Bores from 1.875 to 4.875
    • Floating Shaft
      • Torques from 4.370 to 163,800 lb.in.
      • Bores: SB Shaft End from 1.500 - 4.875 and SD Shaft Diameter from 1.562 - 5.000 inches

    Falk Rexnord Type 'GF' "Steel Mill" Flanged-Sleeve: Specifically designed for steel mill requirements on applications such as reversing tables, feed rolls, reel drives, straighteners, drawing equipment, etc.

    • Double and Single Engagement
      • Torques from 7,600 to 1,116,000 lb.in.
      • Bores from .50 to 9.750 inches
    • Floating Shaft
      • Torques from 4,370 to 1,160,000
      • Bores: SB Shaft End Diameter from 1.50 - 9.500 and SD Shaft Diameter from 1.562 - 9.560
    • Spacer
      • Torques from 7,600 to 1,160,000
      • Bores from .50 - 1.625 to 5.00 - 9.750

     Falk Rexnord Type 'G' Large Flanged-Sleeve: Large-capacity sizes ideal for very high-torque applications in power plants, mining, cement, steel and metal mills, paper, sugar, rubber and other large industrial plants

    Copyright  2008 Rotator Products Limited   |   Design & Hosting By ICM Consulting Corp.